background image

Preface and general information

INTORQ | BA 14.0197 | 04/2016

9

Danger level

1.6

Scope of delivery

The drive systems are combined individually according to a modular design. The scope of delivery is 
indicated in the accompanying papers.

After receipt of the delivery, check immediately whether the items delivered match the accompanying 
papers. INTORQ does not accept any liability for deficiencies claimed subsequently. You should make 
a complaint concerning:
-

visible transport damage immediately to the forwarder.

-

visible deficiencies / incompleteness immediately to INTORQ GmbH & Co. KG.

1.7

Disposal

The spring-applied brake consists of different types of material.

Recycle metals and plastics.

Ensure professional disposal of assembled circuit boards according to the applicable environmental reg-
ulations.

   DANGER

DANGER indicates a hazardous situation which, if not avoided, 

will

 result in death or serious 

injury.

   WARNING

WARNING indicates a potentially hazardous situation which, if not avoided, 

could 

result in 

death or serious injury.

   CAUTION

CAUTION indicates a hazardous situation which, if not avoided, could result in minor or mod-
erate injury.

   NOTICE

Notice about a harmful situation with possible consequences: the product itself or surrounding 
objects could be damaged.

Summary of Contents for WSG-TB.3 series





















































































































































Reviews: