WITTUR WSG-TB.3 series, Operating Instructions Manual

Page: 108 / 148

Technical specifications
INTORQ | BA 14.0210 | 12/2016 12
3 Technical specifications
3.1 Product description
Versions
Abb. 1 Design of the BFK464- S / S.1 spring-applied brake
3.1.1 General information
The spring-applied brake is designed for converting mechanical work and kinetic energy into heat energy.
Due to the static braking torque, loads can be held at standstill. Emergency braking is possible at high speed
of rotation. The wear increases as the switching energy increases (operating speeds
17).
The BFK464 spring-applied brake is a single-disc brake with two friction surfaces. The braking torque is ap-
plied through two separate braking circuits, both electrical and mechanical, via several compression springs
(1.2) in the form of generated friction. The brake circuits are released electromagnetically. Due to its division
into two brake circuits, the brake is particularly suitable for applications such as lift systems and stage/plat-
form technology. The brake can be selected based on the rated torque for one brake circuit. The second
brake circuit meets the requirement for redundancy.
1.1 Stator 5 Shaft 10 Cylinder head bolt
1.2 Pressure springs 6 Flange (optional) 13 Cover plate (optional)
2 Armature plate 8 Coil 16 Microswitch
3 Complete rotor 9 Sleeve bolts 18 Silencer (optional)
4 Hub