Subject to changes without notice !
Änderungen vorbehalten !
Gearless Lift Machine
WSG-SF
Operating Instructions
EN
Code: GM.8.004284.EN
Date:
28. Jan 2020
Version: 0.16
Page: 33
11.3. Brake manual release
The brake can be fitted with a manual brake releasing device on customer request. This must be specified when ordering
the machine. You can implement manual brake release in two variants:
1. Manual lifting rods
2. Brake manual release remotely controlled
11.3.1 Manual lifting rods
Hand release rods can be attached to the levers for easy
opening of the brake.
Due to the machine accessibility, this variant can only be
used for installations with a machine room.
Release
lifting
rods
11.3.2. Brake manual release remotely controlled
The brakes can be released remotely by hand using a lever
block (1) and Bowden cable (2).
The necessary manual release lever including the Bowden
cable for releasing can be delivered, if required.
The standard length of the Bowden cable is 3 m. Other
lengths on request.
~800
N
Release
2
1
Summary of Contents for WSG-SF Series
Page 111: ......
