Gearless Lift Machine
WSG/WGG-29
Operating Instructions
Code
GM.8.002662.EN
Date
04.02.2019
Version
0.19
Page
7
Subject to changes without notice ! Subject to changes without notice !
EN
3.2. Transport and storage
• The lift machines leave the factory in perfect condition after being tested.
• Make a visual check for any external damage immediately upon their arrival on site. If any damage is found
to have occurred in transit, make a notice of claim in the presence of the carrier. If appropriate, do not put
these machines into operation.
• Observe the relevant safety regulations and take the centre of gravity into account when handling the lift
machines.
• Do not expose the motor to any shocks or impact.
• Check that the eyebolts are tightly fitted before using them.
Storage
• Store the motors only in closed, dry, dust-free, well-ventilated and vibration-free rooms (storage tempera -
ture: -20°C to 60°C). Do not store lift machines in the open air. Bright parts are not sufficiently preserved to
withstand extended periods of exposure.
• Avoid excessive storage periods (recommendation: max. one year).
• After prolonged storage (>3 months), rotate the motor in both directions at a low speed (< 20 min
-1
) to
allow the grease to distribute evenly in the bearings.
The ropes must not be fitted!
• Measure the insulation resistance before initial operation of the machine. If the value has dropped below
1k
per volt of rated voltage, the winding needs to be dried (insulation meter voltage: 1,000 V DC).
Unpacking
• Dispose of the packaging material in an environmentally friendly manner or reuse it.
• Any special transport aids or shipping braces are left with the customer.
3.3. Disposal
• The lift machines consist of different materials. A waste separation of those different material components
has to be done.
• The disposal must be professional and environmentally friendly according to law.
Warning
The eyebolts are designed for the specified machine weight, i.e. additional loads must not be
applied. Danger of breakage!
