WittRock Integris 2002, Service Manual, Page: 441 / 452

7.1 Standard Accessory Mounting Adapter Assembly
Chapter 7: Accessories
Figure 7-1. Standard Accessory Mounting Adapter Assembly Installation
m142b190
3. Tilt the accessory (C) that you are installing 10° toward the Integris®
P2002B Headwall System accessory rail (D).
4. Install the accessory (C) onto the accessory rail (D).
5. Tilt the accessory (C) downward, and ensure the mounting adapter
assembly (B) is seated properly onto the accessory rail (D).
6. Switch the white latch (A) from the right position to the left position and
lock the mounting adapter assembly (B) in place on the accessory rail (D).
WARNING:
Ensure the accessory is installed properly onto the Integris® P2002B
Headwall System. Failure to do so could result in personal injury or
equipment damage.
7. Give the accessory (C) a small tug outward to ensure that the mounting
adapter assembly (B) is properly installed onto the accessory rail (D).
7
Integris® 2002 Headwall System Service Manual (man142rb) Page 7 - 7