Wittke TWIN AUGER Operator'S Manual Download Page 64 | Manualshive

Page: 64 / 87

background image

56

Operating the W

ITTKE

T

WIN

A

UGER

™

Visual Inspection

Before starting the vehicle, the operator MUST perform a visual inspection of the truck. Ensure the
engine is not running and the parking brake is set.

As part of the visual inspection, you must:



Ensure the cleanliness of lamps, safety decals, camera lenses, mirrors, windows, and the vehicle in
general.



Ensure that safety equipment is present (i.e. fire extinguisher, first aid kit).



Ensure there is no structural damage.



Ensure that pod mounts to chassis are tight and that there are no cracks on it or on the structure
around it.



Ensure that there is no unusual wear, distortion, cracking, leaning, leaking on the vehicle.



Ensure that hydraulic oil level (sight gauge on tank) is as recommended (cylinders must be
collapsed).



Ensure that the hydraulic cylinders do not leak and that mounting pins are secure.



Ensure the hydraulic tank shut-off valve is fully open.



Ensure there are no mechanical problems: structure, rollers, hinges, door locks, wear items, etc.
Report any defective system to the maintenance personnel.



Ensure there are no leaks, cracks or other types of problems on the frame area, fuel tank, hydraulic
tank, air tanks (air tanks must be drained every day) and wheels.

Once the visual inspection is over, you must start the engine to check if the systems are working
properly.

Starting the Vehicle

To start the W

ITTKE

T

WIN

A

UGER

™:

1.

Before starting the engine, check the following items:

1 a.

Transmission shifter is on neutral.

1 b.

Parking brake is on (see

Parking Brake

1 c.

Hydraulic system is off (see

2.

Start the vehicle as stated in the chassis manufacturer’s manual.

3.

Switch

ON

the pump switch to engage the hydraulic system (see Figure 3-16).

N

OTE

:

The air pressure has to be at a minimum of 70

PSI before switching ON this switch.

4.

Turn ON all light switches.

5.

If required, move the truck to an appropriate area to perform the daily inspection.

6.

Report any defective system to the maintenance personnel.

«
...
62
63
64
65
66
...
»

Summary of Contents for TWIN AUGER
























































































Reviews:

No comments

Related manuals for TWIN AUGER

Brand: Komatsu Pages: 258

Brand: little mule Pages: 18

Brand: U-Line Pages: 3

Brand: SAC Pages: 62

Brand: DMF Pages: 108

Brand: Pierce Pages: 196

Brand: Eagle Group Pages: 2

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands