LUC
+
125, 24 V, time-controlled
Revision: 01
1000088471
en-7
3
Description of the lubricator
The lubricator is designed as a highly compact double piston pump for grease as lubricant.
The two pistons run with forced-control and in opposed directions. They are both connected to
the same outlet. The outlet is secured by an integrated check valve. At each dispensing process,
approx. 0.15 cm³ of lubricant are dispensed. Multiple subsequent dispensing processes
can be set.
The lubricator features an electrical interface. The included magnetic pen allows for the
lubrication volume dispensed per time to be adjusted or set to ensure ideal supply of lubricant
to the lubrication point.
The different operating modes are displayed at the front as well as other additional information
(e.g. empty cartridge, errors).
Power supply is established via interface M12x1. This interface can also be used to relay
information on an empty cartridge as well as error messages, e.g. to an external control system.
3.1
Overview of lubricator components
Pos.
Designation
1
LUC
+
125, 24 V, time-controlled
2
Exchange cartridge LUE
+
125
3
Assembly bracket
4
Interface M12x1, 4-pole
5
Magnetic pen (in holder)
6
Hose connection
7
Action field
8
Display
9
Name plate
10
CE mark
Tbl - 1 Overview of lubricator components
3.2
Name plate and labeling
Pos.
Designation
A
Material number
B
Ordering codes
(see chapter 3.4 "Ordering codes")
Tbl - 2 Name plate
1
8
7
2
3
4
5
6
9
10
Mat-No: xxxxxxxx
LUC+125-xxxx-xx
A
B