Device Status
On
Standby
Auto Mode
Battery Low
Recharging
Battery Full
Solid White
Slow Pulsing White
Fast Pulsing White
Solid Red
Pulsing Red
Solid Green
Getting Started
Setting up VBreathe Tasman
2. Download the VBreathe App from the
App Store or Google Play Store.
3. Plug in the power adaptor, then plug
the USB C cable into the back of your
VBreathe Tasman to power.
4. Double press the power button on the front of your
VBreathe Tasman to activate Bluetooth pairing.
5. When prompted by the VBreathe App, enter
the 8-digit pin on the back of these instructions.
Notice: This feature is not available yet.
Gel
Unscrew cap to
insert VActive
Gel cartridge
Light Ring
Cap
Power Button
HEPA Filter
Charging Port
On back
Base
1. Unscrew the cap of VBreathe Tasman. Remove
the lid and seal from the VActive Gel cartridge.
Place the Gel cartridge into Tasman open end
facing up and screw the cap back onto the device.
(See Replace VActive Gel instructions)