7.4 Configuring a printer
The printer that is to be used can be selected using the
“Printer”
tab. The printout with the measured results can be assigned a
header of up to 4 individual lines of text.
Fig. 38: Printer settings
The following settings can be adjusted:
Function
Additional information
Displaying the connected printer.
A printer that is connected to the Watch Expert via the printer port
(RS232) is displayed.
If a Bluetooth connection is selected, then all Witschi Bluetooth
printers within range are listed.
Enter the first line of the printout
header.
You can enter up to 20 characters.
Enter the second line of the printout
header.
You can enter up to 20 characters.
Enter the third line of the printout
header.
You can enter up to 20 characters.
Enter the fourth line of the printout
header.
You can enter up to 20 characters.
Editing headers for print logs
Adjusting printer settings
Configuring the user interface
Configuring a printer
27.02.2018
Precision measuring device Watch ...
61
