manualshive.com logo in svg

Witschi Watch Expert, Operating Instructions Manual

Share
Download
Witschi Watch Expert Operating Instructions Manual Download Page 52

6.7  Generating screenshots

Using the screenshot function, images of the current view can be

generated.

Requirement:

n

A USB stick is connected to the Watch Expert

Press the 

“Print”

 touch button.

ð

A screenshot of the current view is saved to the USB

stick.

Accessing screenshots
The generated screenshots are saved to the USB

stick in PNG format. To access the screenshots,

remove the USB stick from the Watch Expert and

connect it to a computer.

6.8  Restarting a measuring procedure

Using the restart function, the determined measured values can be

deleted and the measuring procedure can be restarted.

Press the 

“Restart”

 touch button.

ð

The measuring procedure is restarted. The previously

determined measured values are deleted.

Screenshots of measured results

 Performing a measurement

Restarting a measuring procedure

27.02.2018

Precision measuring device Watch ...

52

Summary of Contents for Watch Expert














































































Reviews:

No comments

Brands by name

Popular brands

Load more brands