6.4 Switching the speaker on/off
The speaker can be switched on and off by pressing the speaker
symbol. With the loudspeaker activated, watch irregularities can be
heard.
1.
Press the
“Speaker”
touch button.
ð
The speaker is switched on. The symbol is shown as fol-
lows:
2.
Press the
“Speaker”
touch button.
ð
The speaker is switched off.
6.5 Pausing and resuming the measuring procedure
As soon as the watch is positioned and clamped with the clamping
jaw (
), the measuring procedure starts automatically.
Using the pause function, the measuring procedure for the analysis
of the determined values can be paused.
Avoidance of background noise
The measuring procedure can be paused to pre-
vent the microphone recording background noise
when the test position is changed.
1.
Press the
“Play/Pause”
touch button.
ð
The measuring procedure is paused.
Printing measured results
If the measuring procedure is paused,
the current view can be printed (
2.
Press the
“Play/Pause”
touch button.
ð
The measuring procedure is resumed from the same
point.
Speaker switched on
Speaker switched off
Pausing the measuring procedure
Resuming the measuring proce-
dure
Performing a measurement
Pausing and resuming the measuring procedure
27.02.2018
Precision measuring device Watch ...
50
