Witeg Wisd DH.WOS01251, Operating Manual

Page: 10 / 16

www.witeg.de
8
1 Introduction
Thank you for purchasing our WiseStir
®
HT-AX Overhead Stirrer . You did a good choice
buying a Wisd product.
Before use, please read this manual and use it properly.
To cover the user’s health and avoid the product’s destruction you have to follow the safety
instructions of the second chapter.
Please keep this operating manual in a save place for future reference and hand it out if you
consign the device to a third person.
Witeg reserves to modify the capsule or make amendments for the improvement of quality and
efficiency without prior notice.
2 Safety Instructions
2.1 Description of Symbols
WARNING
Information for avoiding injuries or fatal accidents.
ATTENTION
Safety instruction to avoid a damage of the product.
ATTENTION
Information about technical parameters.
Environment
Information about the operating environment.
WARNING of explosions
Safety instruction to avoid explosions.
2.2 Instructions
For a safety and faultless using of the device it is indispensable that you read the following
instructions purposely and follow them by the use.

Connect the device only to the suitable power supply. Please have a look to the
identification plate.

Use the device only in electric circuits with ground fault circuit interrupter.

Check the power supply cord before you stick it into the electrical outlet.

Do not use power bars to extend the power supply cord.

Only use extension cables with sufficient cable cross section.
witeg Labortechnik GmbH, WiseStir
®
HT-AX Overhead Stirrer