MCR41/MCR42 User Manual
5
U
SER GUIDE
NEW DISPLAY
Front Panel
MCR42 allows an easy and quick configuration using buttons, RGB LED’s and an OLED display. The
front panel is functionally divided in the following section:
A & B
SMA antenna Connector:
MCR42 is supplied with a couple of antenna tuned on 400 MHz bandwidth suitable to be used with
MCR42-N, MCR42-M, MCR42-L, MCR42-H version.
C
RGB Leds: Each of the 2 receivers has a dedicated set of LED’s to give a clear indication of its
status.
“ON LED” (
on NEW display
)
GREEN
The receiver is on with an external power supply
PALE GREEN
The receiver is on with battery
GREEN BLINKING
The external power is low
PALE GREEN BLINKING
The power of the battery is low
RED BLINKING
Relative transmitter battery is
low:
- slowly blinking if 25% lifetime
- quickly blinking if 12% lifetime
When the “ON LED” become red blinking,
the display, if it is off, it automatically turns
on and remains on until the alarm does not
fall.
A
C
C
B
C
D
E
F
G
Summary of Contents for MCR41
Page 9: ...MCR41 MCR42 User Manual 8 Advanced...
Page 43: ...MCR41 MCR42 User Manual 42...
