Wisstar WP-N6516-M2-16P User Manual Download

Page: 139 / 195

Network Video Recorder User Manual

138

Configure DDNS

Purpose

You can set Dynamic DNS service for network access. Different DDNS modes are available:
DynDNS, PeanutHull, and NO-IP.

Before You Start

You must register DynDNS, PeanutHull and NO-IP services with your ISP before configuring DDNS
settings.

Go to System > Network > TCP/IP > DDNS.

Check Enable.

Select DynDNS under DDNS Type.

PeanutHull and NO-IP are also available under DDNS Type, and required information should be
entered accordingly.

Enter Server Address for DynDNS (i.e. members.dyndns.org).

Under Device Domain Name, enter the domain name obtained from the DynDNS website.

Enter the User Name and Password registered in the DynDNS website.

DDNS Settings

Click Apply.

Summary of Contents for WP-N6516-M2-16P




































































































































































































Search results

Summary of Contents for WP-N6516-M2-16P

Reviews:

Related manuals for WP-N6516-M2-16P

Brands by name

Popular brands

Wisstar WP-N6516-M2-16P, User Manual

Search results

Summary of Contents for WP-N6516-M2-16P

Reviews:

Related manuals for WP-N6516-M2-16P

Brands by name

Popular brands