Wisstar WP-N6516-M2-16P, User Manual

Page: 119 / 195

Network Video Recorder User Manual
118
Percentage: The ratio of the in-region part of the object that can trigger the alarm. For
example, if the percentage is 50%, when the object enters the region and occupies half of
the whole region, device will trigger an alarm. Its range is [1-100].
Click Draw Area and draw a quadrilateral in the preview window by specifying four vertexes
of the detection region.
Set the arming schedule. Refer to Chapter 11.1 Configure Arming Schedule.
Set the linkage actions. Refer to Chapter 11.2 Configure Alarm Linkage Actions.
Click Apply.
Region Entrance Detection
Purpose:
Region entrance detection function detects objects that enter a pre-defined virtual region from the
outside place.
Go to System Management > Event Settings > Smart Event.
Click Region Entrance Detection.
Region Entrance Detection
Select a camera to configure.
Check Enable Region Entrance Detection checkbox.
Optionally, check Save VCA Picture checkbox to save the captured pictures of region
entrance detection.