then view the screen from two kinds of angle through this operation.
Shift among VW/Bypass/TC-Ni/TC-Ti/TC-SS/TCR Mode
When the device is on, press the fire button 3 times in quick succession, then press
the left or right regulatory button to shift among VW/Bypass/TC-Ni/TC-Ti/TC-SS/TCR
Mode.
Wattage Adjustment:
Under VW mode, the output wattage can be adjusted from 1W to
80W by pressing the regulatory buttons, right to increase and left to decrease.
Shift among Current, Puff and Time:
Under VW mode, keep pressing the fire button
and right regulatory button, and then the user information sign will blink. Press the left
or right regulatory button to shift among current, puff and time.
Malfunction Indication and Protection:
No Atomizer Alert:
When the device does not detect an atomizer, the OLED screen
will display “No Atomizer Found”.
Atomizer Low Alert:
When the resistance of atomizer is lower than 0.05ohm, the
OLED screen will display “Atomizer Low”.
Atomizer Short-circuit Protection:
When atomizer short-circuit occurs, the OLED
screen will display “Atomizer Short”.
Over 10 Second Protection:
When the fire button is pressed for over 10 seconds, the
output will shut off and the OLED screen will display “Over 10s Protection”.
Low-voltage Protection:
When the voltage of the battery is below 3.3V, the screen will
display “Weak Battery”. Then please charge the battery to unlock the device.
Warranty
Please consult with your WISMEC distributors for warranty policy. We are not
responsible for any damage caused by user error.
This warranty is only valid for authentic WISMEC products within warranty period from
date of purchase by the end user.
Warning
1. Keep out of reach of children.
