Wisenet XRP-4210B4 Quick Manual Download Page 6

Page: 6 / 44

overview

coMposition of User ManUal and gUidelines

This User Manual is composed as follows.

•

Quick Guide

•

SSM User Manual

•

Supplementary Manual to Link with Other Systems

•

RAID Manual (English)

The User Manual is in a PDF file format. The manual can be read by downloading and installing a free

PDF viewer on the Internet.

This User Manual is the default setting for user guidance. The User Manual contains the following

contents in sequential order.
To apply with revision in a real operational environment, refer to the SSM User Manual and Equipment

User Manual.

•

Check Components

•

Product Name and Function

•

Hard Disk Installation Method

•

How to Set Windows Password

•

How to Create Logical Drive

•

Running SSM and Initial Setting Guide

The OS and operational software built in the product have been optimized for the hardware of this

equipment.

Do not discretely add or remove hardware, and do not install OS updates or other miscellaneous

software.

This may lead to risks of electrocution or cause significant issues in product performance.

Summary of Contents for XRP-4210B4













































Search results

Summary of Contents for XRP-4210B4

Reviews:

Related manuals for XRP-4210B4

Brands by name

Popular brands

Wisenet XRP-4210B4, Quick Manual

Search results

Summary of Contents for XRP-4210B4

Reviews:

Related manuals for XRP-4210B4

Brands by name

Popular brands