Wisenet XNV-6083Z, Online Help Manual

Page: 99 / 108

Event activation time
Depending on the alarm output setup, [Alarm output] options may look different. If there
is no alarm output, [Alarm output] options are not displayed. If there is more than one
alarm output, they are displayed as [Alarm output 1], [Alarm output 2], and so on.
Select [Event]>[Alarm I/O] to set the alarm I/O.
This sets the settings from [Event action settings] to always operate, or only on the set
time when a sound classification event is created.
Always
The set event action settings are always executed when a sound classification event is
created.
Only scheduled time
The set event action settings are executed only when a sound classification event is
created during the set time. The date from Sunday to Saturday, based on the current
camera time, is displayed on the time table shown when [Only scheduled time] is
selected. You can set the time for event action settings by clicking or dragging on the
time table with the mouse. The set event activation time is executed repeatedly on the
relevant weekday and time.
You can change the time view unit by clicking the [1 min], [30 min] or [1 h] button. When
you click the [Reset] button, all set event activation times will be deleted. To confirm or
change the camera time, refer to [Basic]>[Date & Time].