Wisenet TNF-9010, User Manual

Page: 9 / 28

English _
9
!
OVER
VIEW
Inside Rear side
Item Description
a
Fisheye lens This lens has 360˚ vision and it can record video panoramically.
b
Micro SD card slot Compartment for the Micro SD card.
c
Reset Button
The button restores all camera settings to the factory default.
Press and hold for about 5 seconds to reboot the system.
J If you reset the camera, the network settings will be adjusted so that DHCP can be
enabled. If there is no DHCP server in the network, you must run the Device Manager
program to change the basic network settings such as IP address, Subnet mask,
Gateway, etc., before you can connect to the network.
d
Test monitor out port
Output port for test monitoring the video output. Use the test monitor cable to connect to a
mobile display and check the test video.
e
LED light
LED light is displayed in different colors depending on the condition of the vehicle parking
detection.
Item Description
f
Connector cover
An anti-dust rubber cover for DC 12V power and audio/alarm port.
g
Audio/Alarm cable port
Plug in the audio and alarm cable to this port to connect with external alarm device/
microphone/speaker.
h
Power port (DC 12 V) Port for power terminal block.
i
Network Port Used to connect the PoE or Ethernet cable for network connection.
a
d c b e
f
g h i