4_
English
manual netWork setup
Run <
Ip Installer_v2.XX.exe
> to display the camera search list.
At the initial startup, both [
auto set
] and [
manual set
] will be grayed out.
M
`
For cameras found with the IPv6 setting, these buttons will be grayed out as the cameras do not support this
function.
a
Select a camera in the search list.
b
Click [
manual set
].
The Manual Setting dialog appears.
c
In the <
address
> pane, provide the necessary
information.
d
In the <
port
> pane, provide necessary
information.
~
HTTP Port : Used to access the camera using
the Internet browser, defaulted to 80.
~
VNP Port : Used to control the video signal
transfer, defaulted to 4520.
e
Enter the password.
J
`
For the security purposes, you are recommended to use
a combination of numbers, alphabets uppercase and
lowercase and special characters for your password.
`
If you want to change the password, refer to “
Administrator password change
” of the user setup.
f
Click [
ok
].
Manual network setup will be completed.
a
b
d
e
f
c
