Wisenet QNP-6320HS, User Manual

Page: 9 / 23

English _
9
!
INST
ALLA
TION & CONNECTION
installation & connection
INSTALLATION
Precautions before installation
Ensure you read out the following instructions before installing the camera:
~
Select an installation site that can hold at least 5 times the camera’s weight.
~ Stuck-in or peeled-off cables can cause damage to the product or a fire.
~ For safety purposes, keep anyone else away from the installation site.
And put aside personal belongings from the site, just in case.
~
If the product is installed with excessive force, it may cause damage to the camera due to malfunction.
Forcing assembly using non-compliant tools may damage the product.
Disassembling
1. Using a Torx L wrench, turn the three screws counterclockwise to
remove the housing.
Inserting a Micro SD Card
1. Using the screw driver, loosen 3 screws by turning them
counterclockwise and separate the dome cover.
2. Insert Micro SD cards in the direction of the arrows as shown in the
figure.
J
`
Before installing the camera, the Micro SD card should be inserted while the
power source and the body are separated.
` Do not forcefully insert it in the reverse direction. It might damage your Micro
SD card and your product.
`
When it rains or the humidity is high, insertion or ejection of a Micro SD card is
not recommended.
`
Disassembly of the product cover should be finished within 5 minutes, or there
will be the risk of internal dew condensation.