background image

overview

6_

 overview 

RECOMMENDED PC SPECIFICATIONS

 

~

CPU : Intel(R) Core(TM) i7 3.4 GHz or higher

 

~

RAM : 8G or higher

 

~

Recommended browser: Chrome

 

~

Supported browsers:  Chrome, Safari, Firefox, MS Edge(chromium based)

 

~

Supported OS : Windows, Mac, Linux, Android, iOS, Chrome

 

~

Verification environment   
- Windows 10: Google Chrome version 80 or later, Firefox version 72 or later, MS Edge version 83 or later 
- Mac 10.13/14: Safari version 11.0.1 or later

 The video play performance of the web viewer depends on the performance of the user’s CPU and GPU.

RECOMMENDED MICRO SD/SDHC/SDXC MEMORY CARD 
SPECIFICATIONS

 

~

Recommended capacity : 16GB to 256GB (MLC or 3D TLC type required)

 

~

Recommended Manufacturers : SanDisk, Transcend, Samsung 

 

~

Product Type : High endurance, Pro endurance

 

~

The compatibility varies depending on the card manufacturers and types.

 

~

It is recommended to use a memory card of 16GB or more that conforms to the UHS-3 class (MLC type) 
specification.

 

J

 

`

Micro SD card can support up to 512 GB if two slots are used. Each slot supports up to 256 GB, and one slot cannot support 
512 GB by itself.

NAS RECOMMENDED SPECS

 

~

Recommended capacity : 200GB or higher is recommended.

 

~

For this camera, you are recommended to use a NAS with the following manufacturer’s specs. 
Recommended products : QNAP NAS, Synology NAS

WHAT’S INCLUDED

Please check if your camera and accessories are all included in the product package. 
(As for each sales country, accessories are not the same.)

Appearance

Item Name

Quantity

Description

Camera

1

Quick Guide  

(Optional)

1

Power Terminal Block

1

Plugged in the Power port (DC 12V)

Template

1

Product installation guide 

Power Cable 

1

Used to connect to power terminal block

Audio/alarm cable 

1

Used to connect with the audio and alarm port

Cable bushing

1

Extra cable bushing for network cable installation.

Summary of Contents for PNM-C9022RV

































Reviews: