Wisenet PNM-9031RV, User Manual

Page: 8 / 32

overview
8_
overview
AT A GLANCE
Appearance
Item Description
a
Dome cover Case cover used to protect the lens and the main unit.
b
Camera body Body part where the camera lens and connection terminals are included.
c
Mount plate
Plate that fixes the camera when mounting it to the ceiling or attaching it to a separately
sold mount.
Components (Front Side)
Item Description
a
Lens 4 camera lenses create a panoramic image.
b
Illumination Sensor
Detects incoming light to control the IR LED.
c
IR LED These infrared LED’s are controlled by the illumination sensor.
d
Reset Button
The button restores all camera settings to the factory default.
Press and hold for about 5 seconds to reboot the system.
J If you reset the camera, the network settings will be adjusted so that DHCP can be
enabled. If there is no DHCP server in the network, you must run the Device Manager
program to change the basic network settings such as IP address, Subnet mask,
Gateway, etc., before you can connect to the network.
e
MICRO USB port
Port to connect the WiFi dongle.
You can check the installation video through the applications installed in the smartphone.
Refer to “
Connecting WiFi ” on page 20.
` Wifi dongle and OTG adapter are sold separately.
f
Micro SD card slot Compartment for the Micro SD card.
a
b
c
a
c
b
f
d
e