installation & connection
14_
installation & connection
Removing a Micro SD Memory Card
Gently press down on the exposed end of the memory card as shown in the diagram to eject the memory
card from the slot.
J
`
Before removing the Micro SD card, in <
Storage
>, set the device to <
Off
> and press the [
Apply
] button and turn the
camera off.
`
If you turn off the camera or remove the Micro SD card that contains data from the product, the data may be lost or damaged.
CONNECTING WITH OTHER DEVICE
J
`
The Test Monitor Out port of the product is provided for easier installation, and is not recommended for monitoring purposes.
Powering and networking
Connect the PoE terminal of the camera to the PoE device.
J
`
Connect to a PoE (Power over Ethernet) enabled router’s PoE connector.
`
Use PoE (Power over Ethernet) that is compliant with the IEEE802.3af protocols.
Network Cable Specification
Item
Contents
Remark
Connector
RJ45 (10/100BASE-T)
Ethernet
10/100BASE-T
Cable
Category 5e
Max Distance
100M
DC Resistance
≤
0.125 Ω/m
PoE Support
IEEE 802.3af
