Wisenet LRN-810S User Manual Download Page 28

Page: 28 / 123

28_

live

Display Text

You can monitor texts regarding the sales record received from POS in real time.

￭

This is executable when a text device is connected.

￭

The Recorder can display text on a live screen when a text device is set. For details, refer to the "

Setup

Setting the Device

Text

" page in

the Table of Contents.

Select the desired channel and click < >.
When text information occurs, the text information is displayed in the corresponding video window.
Also, when a set text event occurs, the corresponding part of the text is displayed in a separate color.

Onions 3.59

CHIP 2.37

Apple 2.69

Goat 0.79

Peppers red, loose 0.59

2 x 0.79 1.18

Pasta 0.59

2 x 0.59 1.18

========================

TOTAL 3.63

> appears when text information crosses the screen. Click <

> to display a popup window where you

can check the entire content.

Change Channel Aspect Ratio

You can change the aspect ratio of each channel.
Select the desired channel and click <

It changes to the actual proportion of the video.

Summary of Contents for LRN-810S




























































































































Search results

Summary of Contents for LRN-810S

Reviews:

Related manuals for LRN-810S

Brands by name

Popular brands

Wisenet LRN-810S, User Manual

Search results

Summary of Contents for LRN-810S

Reviews:

Related manuals for LRN-810S

Brands by name

Popular brands