Wisenet HRX Series, User Manual

Page: 92 / 109

92_
setup viewer
setup viewer
Camera setup
You can change the settings of the connected camera.
setup > Camera > Camera setup
●
When you click the < Camera webviewer > button, a new camera web browser window is opened.
– This is not supported if the camera is connected to the RTSP protocol.
– This is not supported if the camera is connected to DDNS, URL, or MAC Address.
– It supports the version specified below or later for each Q/P/X series camera.
(QND-7010R series : 1.04, QND-7080R series : 1.02, QND-6010R series : 1.02,
QND-6070R series : 1.01, P series : 1.01)
– It supports only when the camera is connected to IPv4 and is not set to HTTPS.
– When you are connecting to the camera web page on a closed network, a camera that does not support the
universal web will not be able to output an image.
– The cam proxy port's default settings are automatically set in sequence as many as the number of channels
supported by Recorder. If you want to change the proxy port, then select the port setup menu.
– 4 channels (10001-10006), 8 channels (10001-10010), 16 channels (10001-10016)
example) defaults of cam proxy ports for each product
●
4-channels model : 10001-10006
●
8-channel model : 10001-10010
●
16-channel model : 10001-10016
– When connecting outside the closed network as shown in the figure, the port forwarding setting of the
camera proxy port is required for the router.
USB
DIGITAL VIDEO RECORDER
REC HDD ALARM NETWORK BACKUP POWER
Recorder
Network Camera
IP router Remote PC
Internet
– If there are multiple Recorders within the closed network, each cam proxy port should be set using a
different port.
– If DDNS and Quick Connect are enabled, port forwarding will be automatically set.
– Chrome, Edge and Safari (Mac OS) browsers are supported.
Profile setup
You can set the profile for your camera.
setup > Camera > Profile setup
record
You can set the record profile for your camera.
Live
You can change the live transfer settings of the camera.