18_ Connection
Connection
how to connect cables
Refer to the following figure to connect the camera to external devices.
7
6
3
5
1
Power
2
AHD 1CH
3
AHD 2CH
4
AHD 3CH
5
AHD 4CH
6
ALARM
7
RS485
1
Power : The camera is connected to a proper power source. The camera
supports both 12V DC and 24V AC.
Following is the maximum power of the power supply
equipment.
DC12V : 0.7A / 6.7W (MAX_TDN ON)
AC24V : 0.6A / 7.3W (MAX_TDN ON)
2
~
5
1-4 ch AHD BNC outputs : AHD_Ch 1 to AHD_Ch 4 of each camera
are connected to a DVR that supports
AHD video.
6
How to connect alarm terminal :
Alarm terminal connection method : Camera alarm cables are connected
to (+) and (-) terminals of sensor/alarm devices, and it operates in short-
or open-circuit method according to alarm occurrence or not.
1# DOUT +
ORANGE
3# DOUT +
GREEN
1# DOUT ╴
RED
3# DOUT ╴
GRAY
2# DOUT +
YELLOW
4# DOUT +
WHITE
2# DOUT ╴
BLUE
4# DOUT ╴
BLACK
7
RS485 device connection method : RS485 cables are connected to (+)
and (-) terminals of a controller or DVR equipment.
1) WHITE cable : RS485 -
2) BLACK cable : RS485 +
