Installation
16_ Installation
how to adjust camera angle of 4 sensor module
It is possible to tilt and rotate the angle of each sensor module as follows.
`
Monitoring direction adjustment
When a camera is fixed onto the ceiling, It is possible its direction.
Panning means rotation of the camera body left or right. Tilt
means up and down inclination. Rotation means turning on the
lens pivot.
- Panning angle is total 360°.
- Rotation angle is total 355º.
- Tilting angle is
1) fixed to 0º when it is attached to the center of a magnetic plate.
2) 20 - 60º when it is attached to a side of a magnetic plate.
`
How to adjust
1.
After attaching the camera on Magnetic board, the panning angle
is adjusted considering the monitoring direction.
2.
The horizontal angle is adjusted such that the video reversal does
not occur during rotation.
3.
Adjust the tilting angle to face on the monitoring direction.
M
`
Since the camera module is made of magnet, it should be careful for
cable damage during disassembly.
Tilting
Rotation 355°
(0º when it is attached to the center of a
magnetic plate)
(20 - 60º when it is attached to a side of a
magnetic plate)
0º
20 ~ 60º
