Installation
14_ Installation
When installing on a ceiling or a wall
1.
Attach an installation template on a place you want, and drill 3
holes as shown in the picture.
2.
3 anchors are driven into 3 holes above.
3.
3 given tapping screws are driven into anchors above to fix the
camera.
4.
Connect a cable to the camera. Be careful not to damage the
cable. It should be trimmed up.
5.
Refer to "How to adjust monitoring direction of the camera", and
adjust the lens in a direction you want.
6.
Assemble the dome cover into the body.
7.
Remove the dome cover protection sticker.
M
`
If a wall or ceiling is not strong enough to sustain the camera, it may
fall. So, after the installation surface is reinforced, it should be
installed.
`
Use L wrench to tightly fix dome cover screws.
Plastic anchors
Tapping screws
Dome cover
Dome cover protection
sticker (outer side)
Template
