English_37
●
C
amer
a
Oper
a
ti
O
n
- COLOR : The picture is always displayed in color.
- B/W : The picture is always displayed in black and white.
You can turn on or off the burst signal on B/W mode.
M
`
If the lens mounted in the camera is different from the one set in <LENS> of the
<EXPOSURE> menu, then the night/day mode may not operate normally.
y
PRIVACY:
Mask an area you want to hide on the screen.
➊
If the SPECIAL menu screen is
displayed, use the Function Setup
switch so that the arrow indicates
‘PRIVACY’.
➋
Select a desired mode using the
Function Setup switch.
- AREA : You can select up to 8
PRIVACY areas.
- MODE : Determines whether to use the
area selected in the AREA.
- MASK COLOR : Determine area
color. You can select Green, Yellow, Red, Blue, Black, White, Gray.
- TRANSPARENCY : Adds or removes transparency from the masking area.
- V POSITION/HEIGHT/H POSITION/WIDTH : Adjust the size and position of the selected area.
- RETURN : Return to the SPECIAL menu.
y
MOTION :
This product generates signals each time an object movement is detected in the four areas
of the screen so efficient monitoring can be achieved.
➊
If the SPECIAL menu screen is
displayed, use the Function Setup
switch so that the arrow indicates
‘MOTION’.
➋
Select a desired mode using the
Function Setup switch.
y
DET. AREA : Set the areas of motion detection.
`
SEL AREA : Select from four areas that users want.
`
MODE : Determine whether to use the selected area.
MOTION DET
▶
1.
DET. AREA
2.
SENSITIVITY
IIIIIIIIII
I
IIIIIIIIII
5
3.
RETuRN
PRIVACY AREA
▶
1.
AREA
AREA
1
2.
MODE
OFF
3.
MASK COLOR
GREEN
4.
TRANSPARENCY
OFF
5. V POSITION
II
I
IIIIIIIIIIIIIIIIII
25
6. HEIGHT
IIIIIIII
I
IIIIIIIIIIII
50
7. H POSITION
I
IIIIIIIIIIIIIIIIIIII
10
8. WIDTH
IIII
I
IIIIIIIIIIIIIIII
30
9.
RETuRN
