overview
8_
overview
AT A GLANCE
Appearance
Item
Description
a
Main cover
Protects the internal PTZ mechanism from the direct sunlight, rain or external impact.
b
Dome cover
Shield cover for the lens and unit protection.
c
Micro SD Card cover
Covers micro SD card slots and the Reset button. You can open it using the Torx L wrench.
Inside(XNP-9250R/XNP-8250R/XNP-6400R)
Item
Description
a
IR LED
These infrared LED’s are controlled by the illumination sensor.
b
Illumination Sensor
Detects incoming light to control the IR LED.
c
Heater
At a certain temperature below the threshold, it automatically operates, or you can turn it on
manually in the web viewer.
d
Lens
Lens for the camera.
e
Reset button
The button restores all camera settings to the factory default.
Press and hold for about 5 seconds to reboot the system.
J
If you reset the camera, the network settings will be adjusted so that DHCP can be
enabled. If there is no DHCP server in the network, you must run the Device Manager
program to change the basic network settings such as IP address, Subnet mask,
Gateway, etc., before you can connect to the network.
f
Micro SD Card slot
Compartment for the Micro SD card.
c
a
b
f
c
b
d
e
a
