English _
11
connecting with other device
arn-1610S
1.
Loosen the screws on the back and slide the cover back to remove it.
2.
Connect the SATA/power cable of the hard disk to the connector of the main board.
■
Gently press the connector before removing the HDD. Do not force to pull the cable.
3.
Use the screws to fix the hard disk to the bottom of the recorder.
4.
Make sure that there is no problem in the connection port and routing inside the recorder, and then fix it
using screws after closing the cover.
■
When closing the cover, be careful not to damage the cable.
