installation & connection
10_
installation & connection
How to connect the RJ45 waterproof cable to a LAN cable
1.
Insert it through the arrow direction.
2.
Connect the LAN connector (male) to the cable.
3.
Connect the RJ45 modular jack (female) to the RJ45
connector (male).
J
`
Please, keep each of the parts separated.
4.
Assemble by rotating the RJ45 modular jack (female) and the RJ45
protection cover clockwise (Follow the arrow).
5.
Assemble by rotating RJ45 protection cover and back cover
clockwise (Follow the arrow).
When the back cover is assembled, the cable waterproof gasket is
tightly attached to the cable to make it waterproof.
J
`
You must fully assemble it to rotate the back cover up to the end of the screw thread of the RJ45 connector.
8.
Put the middle cover back and rotate it clockwise until it is firmly in
place.
`
Align the insert mark on the camera body and the interlock mark on the middle
cover to assemble.
M
`
When connecting the cable through the side, remove the wiring hole cover first before doing so.
RJ45 connector
(male)
RJ45 modular
jack (female) Rubber ring
RJ45 connector
protection cover
Back cover
Cable waterproof
gasket
Rubber ring
Summary of Contents for ANE-L6012R
Page 1: ...NETWORK CAMERA User Manual ANE L6012R ANE L7012R ...
Page 23: ......
