Wisenet 2M2800Q, User Manual

Page: 15 / 27

English _ 15
●
●
INST
ALLA
TION & CONNECTION
Method 1. Connecting the LAN cable
1. Remove the dome cover and the case.
2. Pull out the long projected part of the rubber plug on
the bottom and remove it as shown in the figure.
J
`
Use an appropriate cable bushing for the LAN cable to be
connected.
- Basic camera : Use the cable with a diameter of
Ø5~6.5.
- Components provided : Use the cable with a diameter
of Ø7~8.5.
3. Insert the LAN cable through the hole appeared after removing the
projected part in step 2 above.
4. Remove the sheath with a cable cutter, and align the cables.
5. Connect the LAN cable with a LAN connector, and insert it into the
LAN tool.
6. Connect the finished cable to the Ethernet port.
Method 2. Connecting the LAN cable
1. Remove the dome cover and the case.
2. Pull out the long projected part of the rubber plug on
the bottom and remove it as shown in the figure.
3. Pull the rubber cover over the hole to remove it.
4. Use the Cap Installer to allow the RJ45 cable to pass through.
5. Insert the rubber stopper again and connect the LAN cable to the
Ethernet terminal.
1
1
1
0
0
2
ON
RESET
POE+
1
2
3
4
CH 4
CH 3
CH 2
CH 1
ON / OFF
Ple
ase
turn off whenyou chang
e
lens module.
LENS
1
VIDEO
CH
00 : CH 1
10 : CH 2
01 : CH 3
11 : CH 4
2
3
4
RESET
CH 4
CH 3
CH 2
RESET
CH 4
CH 3
CH 2
1
1
1
0
0
2
ON
RESET
POE+
1
2
3
4
CH 4
CH 3
CH 2
CH 1
ON / OFF
Ple
ase
turn off whenyou chang
e
lens module.
LENS
1
VIDEO
CH
00 : CH 1
10 : CH 2
01 : CH 3
11 : CH 4
2
3
4
RESET
CH 4
CH 3
CH 2
RESET
CH 4
CH 3
CH 2