installation & connection
14_
installation & connection
Attaching to the unbundled adapter
Choose and purchase a necessary one of the following options (unbundled) that is suitable to the installation
site or for your convenience.
1.
Install the hanging mount to the wall mount adapter.
`
Wall mount adapters and hanging mounts are sold separately.
2.
Connect the mounting plate and the hanging mount.
3.
Connect the safety wire.
FRONT
FRONT
FRONT
4.
Mount the camera body to the mount plate.
`
Mount it to fit the hinges as shown in the image.
5.
Connect the terminal inside camera with the required
cable.
6.
Push in the mounting clip.
7.
Adjust the lens to the desired direction by referring to
“
Adjusting the monitoring direction for the camera
”.
(Page 17)
`
If you tilt the lens, you may need to adjust the lens as this may block
the screen.
8.
Assemble the dome cover.
`
Align the arrows when assembling the dome cover.
`
To ensure there are no issues with waterproofing, tighten the fastening bolts
tightly using the Torx L wrench or screw bit.
FRONT
VIDEO
CH1
CH2
CH4
LENS
CH3
RESET
CH
1
0
1
0
LINK
00:CH1
01:CH2
10:CH3
11:CH4
ACT
LINK
00:CH1
01:CH2
10:CH3
11:CH4
ACT
Summary of Contents for 2M2800Q
Page 27: ......
