Wisely MY-L1390, User Manual

Page: 22 / 40

19
4.2 Adjust the laser path
4.2.1
: Put an acrylic piece, paper or other transparent non-metal on the first reflecting mirror. Press “Test”. The next
step is adjusting the position of laser tube to make the laser ray in the center of the first reflecting mirror. Just like the
following picture,

1 .The first reflecting mirror.

2. The side of the laser tube that sends out laser beam.

The green line is the laser path.
Put an acrylic, paper or other transparent non-metal on the second reflecting mirror, press “Test” on the panel, adjust
the screws on the first reflecting mirror to make the laser in the center of the second reflecting mirror.

1. The second reflecting mirror.

2. The first reflecting mirror;

3. The outlet of the laser tube;

4. The green line is the laser path;

First step, move the laser head to the top left corner where the first and second reflector mirrors is nearest.
Put an acrylic, paper or other transparent non-metal before the second reflecting mirror, press “Test” on the
panel to make a laser dot on the material, adjust screws of the first reflecting mirror to make the laser dot in
the center of the second reflecting mirror.

Second step: Stick a paper before the third reflecting mirror, press “Test” on the panel, move the laser head

It is better put on gloves while adjusting the light path, in case
the laser shoot to hands;