Wisdom SC-2, Owner'S Manual

Page: 8 / 23

8
PRECAUTION
For your protection, review “Important Safety Instructions” and “Operating
Voltage” before you install your SC-2.
Note that adequate clearance for the AC cord and connecting signal cables must be
left behind your SC-2. We suggest leaving at least six inches (15 cm) of free space
behind your SC-2 so all cables have sufficient room to bend without crimping or
undue strain.
If possible, the SC-2 should also be placed in such a way that the power switch on
the rear panel is easily accessible. This switch disconnects power from the unit
completely, resulting in effective disconnection of the SC-2 from the AC mains.
You might think of this as a “vacation switch”, should you wish to turn off your
system completely when you will be away from home for a prolonged period of
time. Just remember to turn it back on again when you return.
Ventilation
Your Wisdom Audio SC-2 contains many active devices and a great deal of signal
processing. It will run quite warm under normal operation. It should not be placed
directly on top of another component that generates significant heat, such as most
power amplifiers. Do not block the vents on the sides of the unit.
Mechanical drawings are included in this manual to facilitate special installations
where necessary (see “Dimensions” at the end of this manual).
Operating Voltage
Rated Input: 100 -240 VAC, 50-60 Hz, 0.5 A Max.