11
Proper Planar Placement
The HLS can be installed above or below the display. Depending on the height of the
display, location of the seating, and ceiling height, the HLS may be mounted either
with the planar drivers (PMD) on the top or the bottom. Contact Wisdom Audio when
designing the installation for consultation on the best option for your particular
design. Regardless of placement or orientation, the Line Module Planar Drivers and
the Center Module Array must be mounted with the PMD aligned and the input
terminals aligned. See below closeup.
NOTE
: We recommend allowing for 36
”
(915mm) of hard surface in the ceiling or the floor in front of
the Hybrid Line Source.
Option 1:
Mounted over the top of the display.
Option 2:
Mounted below the display.
PMD are aligned
Input terminals are aligned
