Maintenance
General maintenance instructions
146
2153734_02_BAL_GRW280_H195_en
© HAMM AG 2011
4.00.05
Important information about maintenance works
General
Specialist knowledge is necessary for the execution of some inspection
and maintenance works; these cannot be given in the scope of these
operating instructions. We recommend to have these works performed
by trained specialised staff.
800-07
Safety
The following safety instructions apply for all maintenance works.
WARNING!
Unintentional movement!
Risk of injury due to unintentional movement during maintenance works.
Carry out maintenance work only when the engine is stopped.
Put machine on a safe surface (even, capable of bearing, horizontal).
Keep away from batters.
Secure machine against rolling away.
002-37
WARNING!
Inadmissable engine start!
Risk of injury due to starting engine during maintenance works.
Prior to maintenance works fasten a warning label on the operator
platform.
Prior to maintenance work, pull off the key from the battery isolating
switch (if applicable).
If no battery isolating switch exist, remove the ground strap from the
battery.
002-08
WARNING!
Uncovered, rotating parts!
Risk of injury due to rotating parts.
Only open the engine hood or engine room doors when the engine is
at a standstill.
002-09
WARNING!
Hot surface, hot fluids!
Risk of burns due to hot surfaces and fluids.
Prior to maintenance works, allow machine to cool down to a
temperature under 30 °C (86 °F) .
Do not touch hot machine parts.
Check filling levels only when machine is cooled down.
002-10