WPS-MNT-L-DOM Dome Camera L Mount
Introduction
© 2012 Wirepath™ Surveillance
pg. 1
Installation Guidelines
Parts Included
Mounting
When mounting to a junction box, we recommend the use of metal junction boxes, doing so will
provide the most secure installation.
Weatherproofing
While grommets and gaskets are provided to help block out moisture, we recommend adding a bead
of silicone around the edges of the mount for outdoor installations. This will help ensure that moisture will
not enter the wall.
Exploded View
A. (1) Camera Mount
B. (1) L Mount
C. (1) L Mount Gasket
D. (1) Wall Plate Adapter
Note: Make note of this diagram and letters as
they are used later in this document.
Not Shown
E. (2) M5x12L Round Head Philips
F. (2) M5x8L - Hex Thumb Screw
G. (2) #6-32x3/4”L - Flat Head Philips
H. (2) #8-32x3/4”L - Flat Head Philips
I. (4) M3x4 Pan Philips Head
J. (4) M6x20L Round Philips Head
K.
(4) M6x20L Tab Fastner
L.
(3) M4x10L - Round Head Philips with
Rubber Washers
M. (1) Manual
Wirepath™ Surveillance Camera Mount Plates have been designed to simplify installation and
overcome the complexity of concealing connections when installing Wirepath™ Surveillance cameras.
Each mount fits a variety of interior and exterior junction box sizes providing flexibility during installation.
• Single
• Double
• 4” Square
Installation Manual
A
B
C
D
Exploded View