WPS-300-NVR Installation Manual
Pg. 7
www.snapav.com Support: 866.838.5052
2- Manual Overview
We recommend that this document is read in its entirety before proceeding with system design, installation, or operation of the WPS-
300-NVR. When viewing this document electronically, the content identified within references can be quickly located by clicking on
the reference. These references have been formatted as a standard hyperlink so that they can be easily identified with exception to
the TOC which can also be used to link to sections.
3- Required Items for Installation
The following items are required during the installation of a Wirepath™ IP NVR. It is recommended that these items are prepared in
advance to ensure that the installation can be performed smoothly.
All NVR to be installed in the system
All Cameras to be installed in the system
All Encoders to be installed in the system (Optional)
Network Connection near the location of the NVR
Administrator rights to the computer that will be used to access the NVR(s)
Router / Switch Details
– Contact the network admin to obtain
o
Admin Rights
– Required to setup the network and port forwarding for remote access.
o
Default gateway
o
Net Mask Address
o
DNS Address
o
Static IP to assign to the NVR
Insta
llation Manual for all the Wirepath™ Surveillance IP NVR being installed
Quick Start Guide and Installation Manual for Wirepath™ Surveillance IP Cameras
Quick Start Guide and Installation Manual for Wirepath™ Surveillance Encoders
CD-Rom supplied with the NVR
4- Package Contents
(1)
WPS-300-NVR-9IP or WPS-300-NVR-16IP
(1)
USB Mouse
(1)
IR Remote
(1)
12V DC 5A Power Supply
(2)
Rack Ears
(8)
Rack Ear Screws
(2)
AAA Batteries
(14)
HDD Screws
(1)
Quick Start Guide
(1)
CD-Rom containing documents and setup software
