WPS-300-NVR Installation Manual
Pg. 54
© 2013 Wirepath™ Surveillance
14.3.1-
Select the checkboxes to enable the desired events for the alarm.
Note:
These settings only affect logging for Event Search
– they have no impact on buzzers,
triggered recording, etc.
Power On Event
When enabled, logs Power On events so they are displayed in Event
Search. When Disabled, Power On events are not logged.
Video Loss Event
When enabled, logs Video Loss events so they are displayed in
Event Search. When Disabled, Video Loss events are not logged.
Record Event
When enabled, logs Record events so they are displayed in Event
Search. When Disabled, Record events are not logged.
DI Input Event
When enabled, logs DI Input events so they are displayed in Event
Search. When Disabled, DI Input events are not logged.
Shutdown Event
When enabled, logs Shutdown events so they are displayed in Event
Search. When Disabled, Shutdown events are not logged.
Motion Event
When enabled, logs Motion events so they are displayed in Event
Search. When Disabled, Motion events are not logged.
Stop Record Event
When enabled, logs Stop Record events so they are displayed in
Event Search. When Disabled, Stop Record events are not logged.
