WPS-300-NVR Installation Manual
Pg. 46
© 2013 Wirepath™ Surveillance
14.1.3-
Channel
Tabs
Selects channels 1 to 9 (or 16).
Display
When selected the image will be displayed for adjusting
Title
Displays the current Title of the channel
Auto SEQ
Dwell
When the NVR main GUI is in SEQ mode, this setting determines the length
of time that the NVR will display the selected camera/channel before
sequencing to the next camera/channel. Each camera can be configured
with its own unique Dwell time.
Contrast
Controls the intensity of white in the video image as it relates to black, the
intensity of white (light) artifacts increases with higher values.
If set too low, foreground images will not be easily distinguishable from
background images. If set too high, lighter images will bloom causing them
to be washed out.
This setting cannot be edited if the selected Camera or Encoder does not
support it.
Brightness
Controls the level for black (darker) in the video image, black appears closer
to black as the number decreases.
If set too low, gray (or similar dark colors) will appear as black making color
identification difficult. If set too high, black will appear as gray making color
identification difficult
This setting cannot be edited if the selected Camera or Encoder does not
support it.
Hue
Also known as tint, adjusts the tone of artifacts that have color.
As the value increases, green, blue, and red levels are increased adding tint
to the image.
This setting cannot be edited if the selected Camera or Encoder does not
support it.
Saturation
Known as color on displays and TVs, adjusts the intensity of color within the
image.
If set too high, the color will bloom causing artifacts to appear blurry. If set
too low, the color will fade causing images to appear washed out.
This setting cannot be edited if the selected Camera or Encoder does not
support it.
Sharpness
Controls the video focus (not lens) of the image.
If set too high, artifacts will appear crisp and jagged at the edges. If set too
low, artifacts appear blurred and smooth at the edges.
Default
Resets the Wirepath Camera or Encoder image settings to default settings.
