WPS-300-NVR Installation Manual
Pg. 45
www.snapav.com Support: 866.838.5052
14.1.2-
Channel
Tabs
Selects channels 1 to 9 (or 16).
Resolution
Available Resolutions (High to Low Quality):
1920x1080
1280x720
640x480
320x240
176x144
Quality
Available Bit Rates (Low to High):
1Mbps
2Mbps
4Mbps
6Mbps
8Mbps
Note:
While higher bitrates increase image quality, they also increase network
traffic and may cause image display issues when multiple devices are being
accessed simultaneously.
Setting Notes
Due to the differences for quality settings between the camera and the NVR,
bitrate may appear blank. Changing this setting in the NVR will change the
setting in the camera.
Frame Rate
Frame Rate (FPS) is adjustable from 5 to 30 in 5 frames per second intervals.
Recommendation:
We recommend that Frame Rate is set to the default of
30 fps unless there is an issue with the image.
Faster frame rates will make the image appear more fluid as more information is
produced each second. This may have an adverse effect on network traffic, and
may not be supported by the display device.
Slower frame rates will make the image appear less fluid as less information is
produced each second. This may cause the image to appear jagged
or “choppy”
due to transmission of fewer frames.
Exit
Returns to the Camera Menu.
