Wirepath Surveillance WPS-300-NVR-16IP, Installation And User Manual

Page: 40 / 72

WPS-300-NVR Installation Manual
Pg. 40
© 2013 Wirepath™ Surveillance
NVR Name
Displays the current name of the NVR.
Note that the NVR Name can only be changed from the browser System Information menu.
NVR ID Sets an ID to identify the NVR for IR Remote control to avoid interfering with other NVRs that are in the same
location. When set to “0”, the NVR will respond to any ID selected on the remote control.
See section
6.3-IR Remote for more details.
Note:
leaving the NVR ID set to “0” increases the chance that IR commands sent to other devices in the
system will interfere with NVR operation.
Date Format Selected the Date Format to use for displaying the date on the image and identifying recordings.
Monitor
Resolution Sets the output resolution to use for the VGA and HDMI outputs.
Status Display
Setup Use to enable or disable the following in the status display:

NVR Title

Record Information

Date and Time

NVR IP Status
12.4- Log List
Displays a log of all system-level NVR activities (remote login, HDD format, DHCP address assignment,
etc.).