WPS-300-NVR Installation Manual
Pg. 31
www.snapav.com Support: 866.838.5052
Secure
Connect
Check this box to enable a secure connection when sending emails. This is required
for most current SMTP servers.
Refer to the Email provider or network administrator for information on the use of TLS
and SSL.
Event
Subject
Email notification Subject Line. May be edited.
12.1.2- FTP Settings
When an FTP server is configured, recorded video and snapshot files can be stored on the server for later
access. Contact the network administrator for FTP server information.
Motion/Alarm
Select these check boxes enable sending images or video to FTP when Motion or
Alarms are detected.
Note:
When NVR Record mode is Schedule, and FTP Schedule is configured for
Alarm FTP, Motion FTP or Both, these check boxes will become checked and cannot
be un-checked unless FTP Schedule is changed to No FTP, or Record Mode is
changed to Manual, or Alarm Trigger.
FTP Server
FTP Site address. This is usually the same as one would use to access the FTP site
from a browser or FTP client.
Username
Username used to log into the FTP Site.
Password
Password used for the Username account on the FTP.
Port
Port to use for FTP connection. This is usually 21.
Path
Directory on the FTP site to store content.
Note:
We recommend using path names containing only letters, numbers and
underscores to ensure reliable communications.
Example: /ALARM/, /ALARM123/ or /ALARM_123/.
12.1- DHCP Server
The NVR can be used as a DHCP server for network devices. This should be used for network devices
other than Wirepath IP surveillance devices, as they should be a static IP address, and only when a
network Router is not present in the system.
Enabled
When selected the NVR can be used a DHCP server.
Start IP Address
Address to start for issuing IP addresses.
End IP Address
Address to end for issuing IP addresses.
Lease Time
The amount of time to lease the IP Addresses.
12.2- Player
“Player” is a link to download the IPHA0Viewer.exe program to the local PC. This program is required to
load, view and convert off-line *.HA0 video files saved from the NVR.
See WPS-IP Recording Player instructions for details on downloading and using the player.
