WPS-300-NVR Installation Manual
Pg. 27
www.snapav.com Support: 866.838.5052
12.3- System Update
Important Note:
Updating Firmware MUST be performed over a wired IP connection to the device. While it is possible to recover from an
upgrade that fails due to a lost or intermittent connection, the NVR will be inoperable until it is recovered via a reliable
connection.
Recommendation:
Before performing a Firmware update, we recommend that the NVR configuration be
saved to a file in the event that any settings are changed by the upgrade.
Firmware
Version
Current firmware version of the NVR.
New
Firmware
Select Browse to open a new firmware file stored on the PC. After selecting the file,
select the Upgrade button to begin the firmware update process. Software Updates
can be downloaded from www.SnapAV.com.
Load Default
Settings
Select the Apply button to reset the NVRs to factory defaults.
Recommendation:
This will erase all NVR settings with the exception of network
configuration and the admin account. However, as a precaution we recommend that
the settings are saved prior to performing a factory default.
Load Setup
From
Allows for a setting file previously saved from the browser to be uploaded to the NVR.
Note: This will overwrite any existing settings once Apply is selected.
Backup
Settings
Saves the current settings to a backup file. Select the Download button and select the
desired file path and name.
