WirelessHART WHA-GW-F2D2-0-A-Z2-ETH, Manual, Page: 37 / 127

WHA-GW-F2D2-0-A*-Z2-ETH
Configuration via Web Interface
2
017-
03
37
5.2 Wireless Communication Parameters
5.2.1 Setup
The setup parameters contain the necessary information for establishing and maintaining a
WirelessHART network.
Figure 5.3 Parameter > Wireless Communication > Setup
Changing the Join Key throughout the Network
1. In the web interface, go to Wireless Communication > Setup .
Note!
Prerequisites
In order to change the join key network password parameter, activate the security mode with a
DIP switch inside the enclosure of the WirelessHART gateway. Set the DIP switch 8 to ON.
see Figure 2.6 on page 16

In the security mode, the CMD 768 HART command can be used to set the join key of the
WirelessHART gateway as required.