Remote Console
The TDMA Bridge supports CLI management, which could be accessed by Secure Shell
(SSH). It is recommended PuTTY be used to login. Download it
from
http://www.putty.org/
for free. The minimum system requirement for using PuTTY is
Windows 95, 98, ME, NT, 2000, XP and Vista on Intel x86.
Follow the steps below to implement:
Once the program is downloaded, open up by double-clicking. Note that before using
PuTTY, be sure you are able to connect to the Outdoor Bridge.
Enter IP Address of TDMA Bridge (Default: 192.168.1.1), Port (22) and check SSH as
connection type;
Figure 15
PuTTY Configuration 1
From “
Connection
” in the left menu bar, click “
SSH
”; select “
2
” as “
Preferred SSH
protocol version
”; make “
3DES
” the top position in “
Encryption cipher selection policy
”;
Figure 16
PuTTY Configuration 2