•
VoiceAlert
2
User Manual
•
None
Code 09 – Set Siren Sounding Time for Alarm and Panic
Events and RELAY Output
Prerequisite for basic VA
2
operation:
NO
Background info:
The siren is preset to sound for five minutes when any zone is triggered and or if the
panic button is pressed on any one of the linked remote key fobs. Siren sounding time can be adjusted as
required or deactivated completely.
Function Options:
1. Set the siren sounding time for alarming and panic events and relay output. Siren sound time values
can be set from 1 minute up to max of 99 minutes
Procedure:
•
Press
Return
(Inverted Arrow)
•
Press
PRG
•
Enter
09
•
Press
OK
•
Enter required time in minutes using the keypad (e.g. 5 minutes)
•
Press
OK
•
LCD will Display as above
•
Press
Return
to exit
Related configuration codes
(You may need to set the following related configurations):
•
16
•
17
Code 10 – Set 433MHz RF Signal Reception and Arming
/Disarming Status for Wireless Zones
Prerequisite for basic VA
2
operation:
YES
Reason for Configuration:
Reception of 433MHz Radio Frequency (RF) signals must be fully functional
and optimally configured to ensure reliable and immediate activation of alarms and notifications in response
to wireless zone triggers and or remote key fob panic activation. Default setting is for all RF signal functions
to be active for both wireless sensor RF signal reception and wireless remote key fob RF signal reception
Background info:
VA
2
can be set to receive 433MHz wireless RF signals from both wireless sensor devices
and from wireless remote key fobs. Use code 10 to set how these incoming RF signals will be processed by
VA
2
.
Function Options:
Copyright InFocus Trading 111 cc, 2009
19
